
Despite years of continuous improvement in lithium-ion batteries, you may still find that your devices heat up during heavy use. Hold your phone after a long video call or touch the bottom of your laptop after a day of streaming, and you will feel the warmth of the battery. That heat, more than charging speed, is what quietly ages our batteries. One may ask, where does that heat come from in the first place?
Like most systems, lithium-ion batteries are not perfectly efficient; while they generate energy, they also lose a portion of that energy as heat. Every time lithium ions in the cell move between the electrodes, a small measure of the energy escapes as heat. This phenomenon was captured in an earlier study on energy balance for battery systems, which attributed it to three sources.
The first, and usually the largest, is resistive heat. This can be akin to a toaster wire glowing because it resists the flow of current moving through it. Similarly, every part of a cell puts up some resistance: the electrolyte, the electrodes and the boundaries between them. One fact we can’t ignore is that resistive heat grows with the square of current. This means that doubling the charging current roughly quadruples the heat released. Resistance also increases as the cell ages, as well as when it is subjected to cold environments.
The second heat source is even more subtle. This is known as reversible or entropic heat. This heat results from chemical reactions due to inherent material properties and structural changes in the battery materials. Depending on the state-of-charge of the battery, the reactions can either release a little heat or even absorb it, briefly cooling the cell. This heat explains why a cell’s temperature may not always rise in a straight-line during charging.
The third heat source is one of significant concern to battery scientists: heat due to parasitic or side reactions. Parasitic reactions, such as those resulting from electrolyte components slowly breaking down, wear a battery out over time. These reactions also give off a trickle of heat, whose effects compound over the lifetime of the cell. The rate of this heat generation mode doubles with rise in temperature. That is, the heat speeds up the reactions that make more heat. Under normal conditions, the cell cools faster than it builds heat and nothing dramatic happens.
So, the big question is, how do we measure those small heat changes? This question is at the centre of my current research. Using a technique called isothermal microcalorimetry, a cell is held at a constant temperature and the heat flowing out of it is recorded, often in millionths of a watt. It is precise enough to detect side reactions long before they show up as lost capacity. This technique lets researchers compare new materials in weeks instead of the extended aging that traditional tests require.
A warm gadget isn’t necessarily a warning sign—since a battery is exposed to both complementing and competing electrochemical reactions, some amount of heat is expected. Your battery’s thermal management system is designed to handle it. Trouble starts when heat is generated faster than it can escape. This might be either from a damaged cell, a faulty charger or exposure to extreme temperatures. Consider, for instance, leaving your power bank on a car dashboard on a sunny day. Here’s the thing: batteries don’t fail because they get warm, they fail when they lose the ability to cool down.
In my next blog post, I will be discussing self-discharge in batteries. Check out that blog post to learn where the energy goes when batteries just sit on a counter for an extended period of time.
Image by Richard Duijnstee from Pixabay